You have no items in your shopping cart.
0item(s)
You have no items in your shopping cart.
Helena Hideko Seguchi Kaziyama1, Manoel Jacobsen Teixeira1, Ricardo Bocatto de Oliveira1, Carina Mamy Nishimura1, Vivian Massayo Kaziyama1, Rosa Alves Targino de Araújo1, Karine AS Leão Ferreira1, Cicília Yuko Wada2, Roberta Pessoa Simões3
Disorder related to repetitive movement (RSI: repetitive strain injury/WMSD: Work-related musculoskeletal disorder) of the hand and wrist is associated with prolonged absenteeism from work, therefore, associated with greater loss of productivity(1). More than 90% of patients with RSI/WMSD had musculoskeletal pain and a strong association was observed with Myofascial Pain Syndrome (MSD)(2).
Myofascial Pain Syndrome is one of the most common causes of musculoskeletal pain and functional disability. It is little recognized by health professionals, as the diagnosis depends exclusively on the clinical history and physical examination findings. MDS is a regional neuromuscular dysfunction, with trigger points in the tense muscle band and when mechanically stimulated, it presents local pain or referred pain in distant areas. Myofascial pain can be dull, burning and stabbing. It can become extremely strong and can be confused with bone pain, which makes diagnosis difficult.(3) Myofascial trigger point (TP) can cause a tingling sensation and numbness. In this situation, the electroneuromyographic examination and neurological examination are normal. Many of myofascial TrPs are referred pain, that is, they are far from the affected site.(3) Treatment is clinical and consists of medication, physical means, kinesiotherapy, ergonomic guidelines, use of orthoses and postural hygiene to improve pain and functional disability. The use of long infrared radiation emitted by Bioceramics® incorporated into the Invel® Activive Glove can be another adjuvant treatment option to relieve pain and assist in rehabilitation.
Primary: – Verify the effectiveness of Invel® Actiive Glove in muscle pain in patients with myofascial pain syndrome of the wrists.
Secondary: – Assess functional capacity of upper limbs in patients with myofascial pain syndrome; – Evaluate the safety of using the product.
A monocentric, prospective, controlled, double-blind and randomized study was carried out, approved by the ethics committee, including a sample of 60 volunteers with muscle pain (SDM) caused by repetitive effort in the upper limbs.
Investigational product: Invel® Activive Glove.
Sixty volunteers of both sexes were selected and, after signing the free and informed consent form, randomized into two groups: Group A (group that used the Invel® Activive Glove) and Group B (placebo, which used the same glove). fabric, but without the incorporation of Bioceramica® MIG3®). Volunteers used it for 6 hours a day for 28 days. For both groups, A and B, 4 visits were planned over 2 months.
(a) Pain using the Visual Analogue Scale – VAS; (b) Functional Assessment by DASH (Disabilities of the arm, shoulder and hand); (c) Assessment of PGs (using the Fischer algiometer). (d) JAMAR (grip dynamometer) (e) Clinical evaluation
Pain Intensity:
Pain reduction was assessed over time using the visual analogue scale – VAS and a drop in the right arm of 12% in V2, 28% in V3, in Group A (group that used Invel®) Activive Glove) and variation of 11% in V2, 14% in V3 in Group B (placebo).
The location and reduction of pain were evaluated and we observed significant differences in the absence of pain at 14, 28 and 56 days compared to baseline, in the elbow and wrist, with a significance level of 5%.
There was a decrease in DASH scores, suggesting improved functionality in both groups (p<0.0001).
No clinically significant adverse events were observed in the studied population.
The present study clearly demonstrated that Invel® Activive Glove enhanced the analgesic effect. The light compression exerted by the gloves helps with muscle stabilization and reduces vibration resulting from impact with movements. This product can be used as an adjuvant treatment for pain in the forearms and wrists. ANVISA, the National Health Surveillance Agency, recognized the efficacy and safety of this product and granted ANVISA/MS registration No. 80104760006 on April 25, 2011.
1. Kaergaard A, Andersen JH. Musculoskeletal disorders of the neck and shoulders in female sewing machine operators: prevalence, incidence, and prognosis Occup Environ Med; 2000, 57:528-534. 2. Physical Medicine and Rehabilitation clinics of North Ameica. Myofascial pain: update in diagnosis and treatment. Philadelphia: WB Saynderrs Company 2001. 3. Travell & Simons' Myofascial Pain and Dysfunction The Trigger Point Manual vol 1. Upper Half of Body
This research was sponsored by INVEL® (GOEN3 Indústria e Comércio de Artigos para a Saúde Ltda), and the company that carried out the clinical monitoring of the study, hired by the sponsor, was ProSearch Pesquisa Clínica. Research developed by IITP® (Invel Institute of Technology and Research).
What is Invel?
Established in 1992, Invel is a Medical Technology company with a primary focus on developing and researching FAR-INFRARED Technology. One of our biggest contributions to human health has been the development of the MIG3 Bioceramic. All Invel products are embedded with the patented MIG3 Bioceramic that is proven to stimulate Nitric Oxide production that
How do Invel products work?
Invel products are embedded with the patented MIG3 Bioceramic technology that captures the heat (Far-Infrared) reflected from our own body, converting it into a frequency of heat that reacts positively to our body. This heat (Far-Infrared) reflected back into our body causes the stimulation of Nitric Oxide production. Nitric Oxide has been proven to
What is MIG3 Bioceramic?
Invel’s MIG3 Bioceramic is a compound of minerals (not limited to titanium dioxide, silicon, aluminum….) that reacts to your body when it comes in contact. Creating heat (far-infrared) waves that vibrate in the frequency between 3 to 14,8 µm.
How long must the product be used for maximum effects?
Wear your wellness all day. Each person reacts differently to feel or get the effects of using the Invel products. It depends on your own metabolism. You may use for 24 hours a day, or some hours in a month. Clinical trials done in other countries, showed that 8 hours/day for 2 weeks seems a reasonable period for the usage.
Does Invel have to touch my skin for a greater effect?
Products embedded with Invel technology does not have to touch the skin directly for greater effect. It can be covered or layered without losing effectiveness. Our body is always sending out heat.
Will I feel Invel working?
Clients who use Invel will experience an overall increase in the state of wellness. While you will not actually feel the temporary increase local blood circulation, your body will feel the Invel Technology. It all depends on your life, health and lifestyle history. Some people feel 2C degrees temperature difference, others don’t feel 5C degrees difference. It doesn’t mean, it is warmer or colder. Invel works the same way.
Will my skin temperature increase if I’m reusing my body’s heat?
No, your body’s heat is magnified back as Far-Infrared Ray into the body. If the circulation is increased, the body is able to either warm up or cool down, depending on the external environment.
Does the Invel MIG3 technology wear off with use?
The patented process that Invel uses to incorporate the MIG3® Bioceramic into the fibers will not lose its characteristics.
How should the product be washed?
Delicate Machine wash cold with like colors; use neutral soap
Dry low Tumble or line dry
Do not use bleach, fabric softeners or dryer sheets
Do not iron or dry clean
The MIG3 Bioceramic embedded into the core of the fibers will not wash or wear out.
What has been done to prove that Invel works?
Due to each country’s health regulation, laws and consumer protection, Invel has either, registered in the Federal Regulatory Agencies in some countries, notified or followed an existing health category policy. It means that, a country statement is not validated in other countries, because of the costume, culture, population and consumer rights. The clinical trials were approved by an independent ethics committee (IEC), informed consent from the subjects and Invel products are manufactured under the Good Manufacturing Practice (GMPs).
Is Invel approved by the FDA?
Health Disclaimer
Invel is a non-invasive and non-addicting technology. Invel products can be used by healthy individuals. If you suspect you have a medical problem or disease please consult your physician or health care professional for advice, diagnosis and treatment. The MIG3 Technology mechanism of action of the production of Nitric Oxide can be printed from our website to explain to your physician how the Invel product works.
Invel products are not intended to treat, diagnose, mitigate, prevent, or cure any condition or disease.